K2 Industries
2" to 2.15" Flared 90 Degree L-Bend Exhaust Pipe Tubing Stainless Steel
Description
Description
2" to 2.15" Flared 90 Degree L-Bend Exhaust Pipe Tubing — Stainless Steel
Mandrel-bent stainless steel exhaust tube with precision flare and 90-degree angle for custom routing and turbo applications. Built from 304-grade stainless to resist corrosion and thermal stress. Flared ends accommodate slip-fit connections without additional adapters.
Key Features
- 2" to 2.15" flared ends - Allows clean slip-fit mating without couplers or reducers
- 90-degree L-bend configuration - Pre-angled for common turbo downpipe and intercooler routing
- Stainless steel construction - Handles high-temperature exhaust without rust or warping
Specs
- Material: Stainless Steel
- Tube diameter: 2" to 2.15" flared
- Bend angle: 90 degrees
- Configuration: Mandrel-bent L-bend tubing
Whats Included
- One L-bend exhaust pipe tube assembly
Frequently Asked Questions
Will this fit my turbo downpipe setup without adapters?
The 2" to 2.15" flare is designed for slip-fit connections. Test-fit before final install — some turbo kits use slightly different flare angles or diameters, so confirm your existing downpipe outlet matches this tube's inlet.
Do I need to weld this or can I clamp it?
Clamps work for lower-pressure sections, but high-temperature turbo exhaust typically needs full welds at the flanges for reliability. Have a shop verify your routing and weld method based on your specific boost pressure and application.
Can I paint or ceramic-coat this after install?
Yes — stainless takes ceramic coating and high-temp paint well. Clean with a degreaser first, let dry fully, then apply your coating per the product instructions. No primer needed on bare stainless.
Out of stock
Couldn't load pickup availability
Customer Gallery
See our customer gallery below, submit your own images to be featured!