Subaru Forester SG5 Clear Tail Lights
ETA on delivery is 1-2 weeks (depending on region, and lens/PNP options)
- One set of lenses to replace the factory lenses on the SG5 Forester Tail Lights (Red lens)
- For those ordering the complete PNP sets, they will include LED bulbs for brakes, turn signals, and reverse. You will be receiving them in OEM used, or Depo new housings, depending on what is in-stock.
These are OEM reproduction replacements of the factory lenses in clear material.
Due to the replacement casting material, applying a UV resistant clear coat is recommended to prevent long-term yellowing from UV degradation/exposure.
Please note these are made by hand and to-order in-house. We check every lens for quality and make sure only the best sets go out to you - however please understand some minor blemishes in the manufacturing process may occur. Thank you.
Custom orders/colors are not available at this time, but will be available soon.
Demo video: https://www.instagram.com/p/CNMUSaqBVe-/
How to remove the factory lens tutorial here
Installation instructions are easy -
1. Remove perimeter screws and single screw under the bulb cover.
2. Heat up lights in an oven to 180-200F (heatgun w/ slow application also works)
3. Using flathead screwdriver (or other pry tool), slowly pry original lens out
4. Reheat light to 180F to soften butyl, add additional butyl sealer (3M window weld, etc, recommended to ensure no leakage), if desired
5. install replacement lens, reinsert screws.